| Electrical | 
| Power Source | 110 V/220 V 50/60Hz | 
| Base VFT | 
| Dimensions | 36″w x 35″h x 15″d (94cm x 90cmx 40cm) | 
| Weight | 100 lb (45 Kg) | 
| Excitation motor | Software/manual driven variable speed motor with built-in unbalance load. | 
| Vibration isolation | Four rubber feet | 
| Pendulum Vibration Module (Optional) | 
| Pendulum | Adjustable length and weight | 
| Spring-Mass Module | 
| Spring | Three different stiffness, stackable for 2 DOF | 
| Mass | Three weights, stackable | 
| Torsional Vibration Module | 
| Shaft | Three different diameters | 
| Rotor | Three rotors of different mass and inertia | 
| Vibration Control Module | 
| Tuned mass damper | Hardware for mass-spring absorber, and hardware for beam absorber | 
| Beam with damping treatment | One viscoelastic layer and one constrained layer | 
| Torsional Damper | One dashpot and three fluids | 
| Beam Vibration Module | 
| Beam | One thickness steel, one aluminum, one plastic | 
| Mass | Three weight blocks | 
| Supports | User configurable: cantilever or simply supported, adjustable length | 
| Data Acquisition | 
| Number of channels | 6 | 
| DAQ specifications | simultaneous sampling, USB connection | 
| Software | 
| DAQ and analysis software | Time waveform, spectrum, FRF, motor control | 
| Sensor Kit | 
| Accelerometer | Two single axis wireless accelerometers, two rotational sensors, One Tachometer, six channel simultaneous sampled trans-receiver for wireless data acquisition device, one USB cable | 
| Beam support force transducer | (optional) 
 |