• Description

Key Features
• Supplied with four interchangeable nozzles
with different throat (or orifice) designs
• Nozzles mount vertically and horizontally
• Simple and clear plotting of horizontal jet
trajectory
• Direct measurement of total head, head loss
and diameter of a vertical water jet
• Integral Pitot traverse with blade to measure
head in the vertical jet and diameter of jet
• Works with TecQuipment’s Hydraulic Bench
for easy installation

Learning Outcomes
• Contraction, velocity and discharge
coefficients
• Comparing measured discharge coefficient
from a vertical orifice with a theoretical value
• The influence of Reynolds number
• Comparing measured discharge
characteristics (jet trajectory) from a
horizontal orifice with theoretical values
Key Specifications
• Vertical and horizontal discharge
• Four nozzles included
• Integral Pitot traverse

Detailed Specifications
TecQuipment is committed to a programme of continuous
improvement; hence we reserve the right to alter the
design and product specification without prior notice.
Nett dimensions and weight:
700 mm x 700 mm x 400 mm.
10 kg including nozzles.
Approximate packed dimensions and weight:
0.3 m3 and 15 kg
Maximum head:
Approximately 365 mm
Maximum flow rate:
Nominally 22 litres per minute
Orifice/nozzles:
One sharp-edged orifice and three nozzles
Operating Conditions
Operating environment:
Laboratory
Storage temperature range:
–25°C to +55°C (when packed for transport)
Operating temperature range:
+5°C to +40°C
Sound Levels
Less than 70 dB(A)